Send E-mail
Call 0804855453586% Response Rate
Kumar Chemicals
Ghatkopar West, Mumbai, Maharashtra
GST No. 27AIRPC7586N1ZB
Send E-mail
Call 0804855453586% Response Rate
Our Products

Rigid PolyolYes! I am interested

Description: EXAPOL SUD 435 N is a sucrose based polyether polyol of moderate functionality and low viscosity.
Health and Safety:
EXAPOL SUD 435 N is physiologically harmless.
This product is not particularly dangerous for health. In any case is suggested to observe following Precautions:

To wear appropriate protection for body and eyes
The working room must be ventilated
In case of contact with skin or eyes to wash accurately with clean water and if sprayed on eyes ask for medical intervention.

To absorb eventual losses with sand or sawdust.

Polyurethanes produced from this product may present a fire hazard in certain applications if exposed to fire and/or excessive heat and oxygen, e.g., welding and cutting torches.

Expanded Polymer Systems Pvt. Ltd. guarantees that its products are of the highest quality provided that the conditions recommended in the present instructions are carried out regarding their conservation, maintenance and use.

The high quality of Expanded Polymer Systems Pvt. Ltd. products does not exonerate the Buyer-User from making his own checks as to the suitability of the product.

Expanded Polymer Systems Pvt. Ltd. will notstand responsible for any emerging problems occurring in the eventual transformation of its products which is taken at the risk of the Buyer-User, there in including possible disputes regarding the patents of third parties.

Mono Ethylene GlycolYes! I am interested

Facilitated with huge industrial expertise and understanding, we provide an inclusive collection of Mono Ethylene Glycol.


Features:

Table Top Epoxy Resin and HardenerYes! I am interested
Mix 1Part resin to 1 part hardener. Work time about 30 min. Please mix thoroughly to prevent uncured surface areas from forming
Polyol PUFYes! I am interested
Polyol For Flexible FoamYes! I am interested
Polyol For Flexible Foam
MDI and Polyol ChemicalYes! I am interested

RF 5332/37-20 is a fully blended rigid polyurethane foam system containing HCFC141b as the blowing agent. This product is designed for insulation panel and pipe applications. This product contains flame retardant, giving foam with a minimum fire rating of B3 standard according to DIN 4102.

General Safety Precautions:
The following guidelines apply to both Polyol and Isocyanate components.

Handling:

Contact with skin and eyes must be avoided. Safety goggles, protective gloves and overalls must be worn when working with these chemicals.

Ventilation:

This product must be used in a well ventilated area. Extraction fans to reduce HCFC 141b
build up are recommended to ensure air concentrations are below quoted flammability limits.

First Aid Measures: 

Excessive Inhalation:

In the case of excessive inhalation, where the patient feels dizzy or light headed, remove patient from exposure.

Skin Contact:

Wash skin immediately with water, followed by soap and water. If symptoms (irritation or blistering) persist obtain medical attention. Contaminated clothing should be laundered before re-issue.

Eye Contact:

Irrigate with eyewash solution or clean water, holding the  eyelids apart, for at least 10 minutes. Obtain medical attention.

Ingestion:

Provided the patient is conscious, wash out mouth with water and give 200-300ml of water to drink. Do not induce vomiting.

YD-128 Epoxy ResinYes! I am interested
Epotec YD 128 is an unmodified liquid epoxy resin with medium viscosity produced from bisphenol-A and epichlorohydrin. This is a standard liquid epoxy  resin and a wide  variety of curing agents are available to cure  this liquid epoxy resin at ambient conditions  and also at elevated temperature. When  cured with appropriate hardener, epotec YD  128 gives excellent mechanical, chemical,   electrical and adhesion properties. Because of these properties it finds use in various applications.
Methylene Diphenyl DiisocyanateYes! I am interested
 
Welcome to

Kumar Chemicals

  • Nature of BusinessWholesale Trader
  • Year of Establishment2013
  • Legal Status of FirmIndividual - Proprietor
  • Annual TurnoverUpto Rs. 50 Lakh
  • GST No.27AIRPC7586N1ZB
Kumar Chemicals established in 2013, has been highly engrossed in supplying a range of products such as MDI Isocyanate, Propylene Chemicals, Polyol Puf, Methylene Dichloride etc. Also, the inputs used in their development are of top quality and have been acquired after going through a series of quality checks at our end.


Read More...
 

Kumar ChemicalsKumar Chemicals


 

 

Send SMS
Kamlesh Chawda  (CEO)
Kumar Chemicals
Gala No 17, D K Market, Subhash Nagar Bus Stop, Khairani Road,asalfa Village , Ghatkopar West, Mumbai - 400084, Maharashtra, India
Share Us:
Send E-mail